NETGEAR DGFV338 manual V1.0, April

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual

b.From the ID Type pull-down menu, select IP Subnet.

c.Enter the IP Subnet and Mask of the ProSafe DGFV338 (this is the LAN network IP address of the gateway).

d.Check the Connect using radio button and select Secure Gateway Tunnel from the pull- down menu.

e.From the ID Type pull-down menu, select Domain name and enter the FQDN of the ProSafe DGFV338; in this example it is “local_id.com”.

f.Select Gateway IP Address from the second pull-down menu and enter the WAN IP address of the ProSafe DGFV338; in this example it is “172.21.4.1”.

Figure 5-25

2.From the left side of the menu, click My Identity and enter the following information:

a.Click Pre-Shared Key and enter the key you configured in the DGFV338 IKE menu.

b.From the Select Certificate pull-down menu, select None.

c.From the ID Type pull-down menu, select Domain Name and create an identifier based on the name of the IKE policy you created; for example “remote_id.com”.

Virtual Private Networking 5-37

v1.0, April 2007