DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
Table 0-1. Object Descriptions (continued)
Nos. | LEDs | Activity | Description |
|
|
|
|
5 | Local | Link/Act LED |
|
| LEDs | On (Green) | The LAN port has detected a link with a connected Ethernet device. |
|
| Blinking (Green) | Data is being transmitted or received by the LAN port. |
|
| Off | The LAN port has no link. |
|
|
|
|
|
| 100 LED |
|
|
| On (Green) | The LAN port is operating at 100 Mbps. |
|
| Off | The LAN port is operating at 10 Mbps. |
Router Rear Panel
The rear panel of the ProSafe Wireless ADSL Modem VPN Firewall Router (Figure
1 | 2 | 4 | 5 | 1 |
|
| 3 |
|
|
Figure
Viewed from left to right, the rear panel contains the following elements:
1.Wireless antenna. Two 2.4 GHz antennas attach to either end of the NETGEAR ProSafe DGFV338.
2.DC Power connection (12VDC, 1.5A). Provides power to the gateway when the power supply is attached.
3.Local LAN ports. An
4.Ethernet port. serves as the 10/100 WAN port connection to an external modem. One
5.ADSL port. Serves as the direct WAN DSL connection to the Internet from the internal ADSL modem via a telephone cable.
Introduction |
v1.0, April 2007