On Screen Displays / OSD

With the or button, exit the help function and return to the

main menu. Press the button again and return to the originally received programme.

TV channel identifier

The channel identifier is displayed for several seconds every time the

channel is changed or by pressing the button. The indicates that a channel is received even if no picture can be seen (e.g. radio). The film symbol indicates a TV channel and appears along with the time, and whether teletext is received. The + in the third line stands for the programme selection from the main channel list. If the favour- ite list is selected, the "apple" symbol appears. This is followed by the programme title, as well as start time and end time of the running pro- gramme, provided this data is transmitted.

Radio channel identifier

The identifier for the set radio channel has the same configuration. A radio appears in the upper left-hand corner indicating a radio channel. Programme times and text are displayed only if the corresponding data is transmitted with the signal.

Error message

"Bad or no signal" indicates that there is a fault in the receiving system or in the receiver settings. If the transponder is not transmitting any signals, the channel identifier shows a Sat antenna instead of .

Check the Sat IF connection and the LNB configuration. As an aid, re- fer to the list of service settings provided at the end of the operating manual.

18

Page 18
Image 18
Kathrein UFD 540 manual TV channel identifier, Radio channel identifier, Error message