Common Interface | Kathrein UFD 540 instruction

Common Interface

However, a CA module must be available.

You can find which card is located in the Common Access Module via the main menu and the menu „Common Interface.” Confirm selection

by pressing .

Via the main menu item „Common Interface“ and by pressing , the display appears (each according to the CA-module and card version):

The following displays depend on the module and the card and are, therefore, intended only for example.

With the  button, arrive in a menu, which is generated from the module. When a card is not available, a message appears.

Via this menu, you obtain access with your card and PIN code to the different programmes of your Pay-TV provider.

Here for example, Viaccess is selected. The data for each CAM can vary.

26

Image 26

Kathrein UFD 540 manual Common Interface

Contents

DVB Caravan Receiver UFD Operating manualPage Preface Contents Oscillator frequency L.O Changing the oscillator frequency Data Transfer from Receiver to Receiver Technical Annex Safety Instructions Control Elements, Displays and Connections View of front panel View of rear panel Remote control handset buttons ... Command of Remote Control Button functions Operating InstructionsMenu concept Alphanumeric entries Language selection- OSD Button Presetting of receiving system Connecting receiverPreconditions for receiving signals Connection and Start-up TV and video recorder connection Inserting batteries in the remote controlLNB supply voltage Audio connection First steps First Time InstallationFactory setting of receiver Help function On Screen Displays / OSDImportant screen displays Radio channel identifier Error messageTV channel identifier Channel List Radio/TV Videotext Reception status Programme SelectionSelecting a TV programme Programme Selection Reception status radio Switch-over to a radio programmeSelecting a TV programme by number entry Screen turns dark after a few seconds Selecting a radio programme by number entry You are responsible for inserting the cards Common InterfaceObserve the operating manual of your Pay-TV provider Common Interface Common Interface Timer Settings VPS signal Stereo and two-channel sound reproduction Sound SettingsVolume setting Switching off sound AC3 Favourite programmes Channel listSelecting programmes last received Channel list Channel list Channel list Channel list Search programmes alphabetically Sorting programmes Be careful when delet- ing programmes Deleting programmes  Manually adding programmes Channel list Setting up satellites Adding and Removing Satellites Entering satellite names Removing satellites Programme Overview EPG EPG timer programming Programme Overview Entering a password PasswordFactory setting Password Parental lock Password Backup operation Operation from Front Panel Setting System Parameters System parameters System information Picture format Local time/TimerTV type Screen Installation menu LNB configuration Changing the oscillator frequency DiSEqC setting Antenna settings Antenna rotor / Positioner DiSEqC Satellite search TP set-up/search Transponder selection All new programmes are added to the existing channel list KHz signal DiSEqC UFO Set-up Tone burst Pre-programming is not deleted with Reset After the reset, it may be necessary to repeat all settings Automatic Antenna Alignment with HDP Software and Channel list Update „Display info, a display appears, which you should follow Here, you will also find instructions for downloading Transferring channel lists Data Transfer from Receiver to ReceiverPreparation Transferring operating software Technical features Technical Annex Technical data Scart socket assignments AccessoriesSwitch-over VHS/S-VHS Connection example Digital sound Hi-fi or Dolby digital system Short Technical Lexicon Viterbirate TransponderVideo bit rate Glossary DVB DiSEqC menu ServiceSatellite Page 9362588/A/0505/ZWT Subject to technical changes