Kathrein UFD 540 manual Sound Settings, Volume setting, Stereo and two-channel sound reproduction

Sound Settings

Volume setting

Set the required volume level by pressing the buttons on the re- mote control of the receiver. A bar indicator is displayed on the screen to show the set volume.

Stereo and two-channel sound reproduction

The channel identifier, which is displayed by pressing the button, shows the set sound reproduction. (Depending on the direction of the sound wave symbols –below the time of day –the sound setting may be mono left, mono right or stereo. The number indicates the number of transmitted sound channels).

Press the button to call up the audio menu for sound and lan- guage selection. You can now make the required settings, e.g. lan- guage selection, provided the corresponding data is contained in the reception signal (sound track), Dolby Digital (5.1 CH). Select the menu

points by pressing the buttons and select the required set-

ting with the buttons. Press the button once again to exit the menu.

If captions are transmitted, you can select the bar caption language with the buttons and confirm by pressing .

The following sound settings are possible:

Sound track	1 of 2	2 of 2
Audio mode	Stereo	Stereo
Digital output	MPEG stereo	Dolby Digital / AC3

30