NETGEAR DGFV338 Configuring WPA and WPA2 with RADIUS

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
Wireless Configuration 3-17
v1.0, April 2007
Configuring WPA and WPA2 with RADIUS
Not all wireless adapters support WPA and WPA2. Client software is required on the client:
• W indows XP and Windows 2000 with Service Pack 3, or above, do include the cl ient software
that supports WPA. The wireless adapter hardware and driver must also support WPA.
• Service Pack 3 does not include the client software that supports WPA2. Make sure your client
card supports WPA2. The wireless adapter hardware and driver must also support WPA2.
Consult the product documentation for your wireless adapter; WPA client software for instructions
on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2
settings.
To configure WPA and WPA2 with RADIUS:
1. In the Wireless Security Ty pe section, select the WPA and WPA2 radio box.
2. Then select RADIUS from the WPA with pull down menu. By default, Data Encryption will
be set to TKIP+AES.
3. Enter the following RADIUS Server Settings:
a. Enter the RADIUS Server Name or IP Address. This is the name or IP address of the
primary RADIUS Server on your LAN (required field).
Figure 3-9