DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
7-10 LAN Configuration
v1.0, April 2007
5. Click Reset to discard any changes and revert to the previous settings.
6. Click Save to save your settings.

Static Route Example

For example, you may require a static route if:
Your primary Internet access is through a cable modem to an ISP.
You have an ISDN firewall on your home network for connecting to the company where you
are employed. This firewall’s address on your LAN is 192.168.1.100.
Your company’s network is 134.177.0.0.
When you first configured your firewall, two implicit static routes were created. A default route
was created with your ISP as the gateway, and a second static route was cre ated to your local
network for all 192.168.1.x addresses. With this c onfiguration, if you attempt to access a device on
the 134.177.0.0 network, your firewall will forward your request to the ISP. The ISP forwards your
request to the company where you are employed, and the request will likely be denied by the
company’s firewall.
In this case you must define a static route, telling your firewall that 134.177.0.0 should be accessed
through the ISDN firewall at 192.168.1.100.
In this example:
The Destination IP Address and IP Subnet Mask fields specify that this static route applies to
all 134.177.x.x addresses.
The Gateway IP Address fields specifies that all traffic for these addresses should be
forwarded to the ISDN firewall at 192.168.1.100.
A Metric value of 1 will work since the ISDN firewall is on the LAN.
Private is selected only as a precautionar y security measure in case RIP is activated.

Enabling Universal Plug and Play (UPnP)

Universal Plug and Play (UPnP) can improve the overall networking experience through automatic
discovery and device interoperability. UPnP helps devices, such as Internet appliances and
computers, access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.