Error recovery
Interactive/online method
5.Close the front cover.
6.If desired, calibrate and
Error recovery methods are required when a
IMPORTANT: For scanners: Before beginning error recovery, make sure all images and headers have been transferred from the image buffer to the host system.
Use the Interactive/Online method when your primary concern is that the scanned database or film has no duplicate images.
Follow these steps to use the Interactive/Online method:
1.At the host system, search through the most recently scanned files to determine which images have been scanned and transferred.
2.Find the last successfully scanned image. Record/remember the sequential ID number and/or the image address assigned to the last successfully scanned image.
3.Sort through the stack of documents being scanned to find the document that produced the last successfully scanned image. You will have to rescan all of the documents that follow the last successfully scanned document.
4.When using the Document Scanner/Microimager 990 or Microimager 70, determine the image address of the document that produced the last successfully scanned image (documents that have been successfully scanned and stored in the image buffer have been microfilmed).
Enter this image address into the Document Scanner/Microimager 990 or Imagelink Microimager 70 using the Next IA key or function code F09, which may be programmed as a programmable key. When using Image Management Code, this action serves to reset the image search location on microfilm for subsequent documents scanned.
5.Download the sequential ID number and/or the next image address using a
6.Begin scanning the documents that follow the last successfully scanned document.
NOTE: Documents detected as
6 |