HP unix manual Default B2000 paths are

Boot Console Handler

Displaying and Setting Paths

To set a system path to a new value, follow the directions in “Accessing the Boot Console Handler” earlier in this chapter, and then type the following at the prompt and press Enter:

Main Menu: Enter command> path path_type path

where path_type is one of the path types listed in Table 6-1 and path is the specification of the path in Mnemonic Style Notation (as described in Table 6-2). For example, to set the primary boot path to a SCSI disk with ID of 6.0, follow the directions in “Accessing the Boot Console Handler” earlier in this chapter, and then type the following at the prompt and press Enter:

Main Menu: Enter command> path pri scsi.6.0

NOTE	The default B2000 paths are:
	pri scsi.6.0
	alt scsi.5.0

Chapter 6 149