HP unix manual Removing the Speaker

Field Replaceable Units

FRU Removal and Replacement

Speaker

This section explains how to remove and replace the speaker in the B2000 workstation. The speaker is contained in the mounting bracket with the I/O fan. See Figure 4-53.

Figure 4-53. Location of the Speaker

Speaker

Removing the Speaker

Perform the following steps to remove the speaker:

1.Open the left side panel of the workstation as shown in the section “Opening the Left Side Panel.”

2.Remove the PCI retainer clip and all I/O cards. See the section “Removing I/O Cards” on page 111.

3.Unscrew the two T-15 Torx screws that hold the workstation’s air divider in place, as shown in Figure 4-54. Then grasp the edge of the air divider and pull it towards you to remove it from the workstation.

Figure 4-54. Removing the Air Divider

T-15 Torx

Screw

T-15 Torx

Screw

Air Divider

Chapter 4 127