HP unix manual Look for built-in graphics card

				Troubleshooting
				Selftest Failures
Table 3-2. Chassis Codes for the B2000 Workstation
Ostat	Code	FRU	Message	Description
TST	C680	SYS BD	builtin graphics	Look for built-in graphics card.
INI	C680	SYS BD	builtin graphics	Successfully initialized built-in graphics
				card.
WRN	C680	SYS BD	builtin graphics	Built-in graphics initialization failed.
TST	C68s	SYS BD	test graph in s	Look for graphics card in PCI slot s.
INI	C68s	SYS BD	init graph in s	Successfully initialized graphics card in
				PCI slot s.
WRN	C68s	SYS BD	fail graph in s	Card in PCI slot s failed graphics
				initialization or is not a graphics card.
INI	C740	EXT IO	init other path	Autoboot is trying to boot from
				non-primary boot device.
INI	C780	EXT IO	ld IPL othr path	Loading IPL from non-primary boot
				device.
WRN	C7F0	EXT IO	other IPL fault	Error loading IPL from non-primary boot
				device.
WRN	C7F1	EXT IO	bad alt IPL read	Cannot load IPL from non-primary boot
				device--load address invalid.
WRN	C7F2	EXT IO	bad alt IPL read	Cannot load IPL from non-primary boot
				device--file is not IPL image.
WRN	C7F3	EXT IO	bad alt IPL read	Cannot load IPL from non-primary boot
				device--IPL image size invalid.
WRN	C7F4	EXT IO	bad alt IPL read	Cannot load IPL from non-primary boot
				device--IPL entry point address invalid.
WRN	C7F8	EXT IO	bad alt IPL read	Cannot load IPL from non-primary boot
				device--IPL image checksum failed.
WRN	C7FF	<blank>	launch IPL other	Booting from a device other than the
				primary boot path.
INI	CB00	SYS BD	TOC initiated	A Transfer of Control entered the
				firmware TOC handler.
WRN	CB01	SYS BD	no OS TOC vector	There is no TOC vector for the operating
				system. Firmware will soft boot the
				system.
WRN	CB02	SYS BD	bad OS TOC addr	The operating system TOC handler vector
				is invalid. Firmware will soft boot the
				system.

Chapter 3 71