Field Replaceable Units

FRU Removal and Replacement

2.Remove the rear cover of the floppy disk drive bay inside the workstation by unscrewing the T-15 Torx/slotted screw as shown in Figure 4-18. Push the cover handle toward the rear of the floppy disk drive approximately one inch, and then pull the cover handle toward you.

Figure 4-18. Removing the Floppy Disk Drive Bay’s Rear Cover

Rear Cover Handle

Power

T-15

Torx/Slotted

Cable

Screw

 

Rear Cover

Data Cable

3.Rotate the workstation around until you see the front of the workstation as shown in Figure 4-19.

Figure 4-19. Front of Workstation with the Front Panel Removed

LCD

 

 

Floppy Disk

 

Bracket Screw

Drive Blank

 

Bracket Screw

 

 

 

 

 

100

Chapter 4