Boot Console Handler
Displaying the Current Memory Configuration
Displaying the Current Memory Configuration
The following sample screen output uses the memory command to show a memory configuration table with
To display the current memory configuration for the system, from the Information Menu of the Boot Console Handler, follow the directions in “Accessing the Boot Console Handler” earlier in this chapter. Once you are in the Boot Console Handler Main Menu, type the following at the prompt and press Enter:
Main Menu: Enter command> information
This places you in the Information Menu. From here, type the following at the prompt and press Enter:
Information Menu: Enter command> memory
The screen displays status and configuration information for the memory DIMMs installed in the workstation. See the section “Memory Information Sample.”
Memory Information Sample
The following example shows the memory information when memory modules are properly installed and configured:
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot | Size | Status |
0 | 256MB | Active |
1 | 256MB | Active |
2128MB Active
TOTAL MEMORY = 640MB
MEMORY FAULT TABLE |
|
| |||
Slot | Size | Status |
|
| |
|
| ||||
Active, Installed Memory | : 640MB of SDRAM | ||||
Deallocated Pages | : 0 Pages |
| |||
|
|
|
| ||
Available Memory | : 640MB |
| |||
Good Memory Required by OS | : | 0 (Not Initialized) | |||
| Memory |
|
|
| |
HVERSION | SVERSION |
|
| ||
|
| ||||
0x0860 | 0x0900 |
|
| ||
156 | Chapter 6 |