Configuration
System Hardware Configurations
Configuring a Hard Disk Drive as a File System
This section describes how to use SAM to add a hard disk drive to the workstation as a file system and how to remove the hard disk drive from the workstation. For more information about configuring a hard disk drive, refer to the Managing Systems and Workgroups manual.
The procedures in this section require you to log in as root. If you cannot log in as root, contact the system administrator.
Adding a Hard Disk Drive as a File System
To add a hard disk drive as a file system using SAM, do the following:
1.Log in as root.
2.Move the mouse pointer to the Application Manager control for tools and click the left mouse button. Alternatively you can execute sam at a terminal window command prompt and skip to step 5.
3.
Chapter 2 | 33 |
