HP unix manual Cards, Slot Bits, 5V, 33MHz

Configuration

System Hardware Configurations

I/O Cards

The B2000 workstation’s system board has four Peripheral Connect Interface (PCI) slots for option I/O cards. Slots 1 and 2 are full-size (PCI-2X) slots. Slots 3 and 4 are half-size (PCI-1X) slots. See Figure 2-3 for a brief description of slot capabilities.

Figure 2-3. PCI Card Slot Numbering and Capabilities

Slot 1

Slot 2

Slot 3

Slot 4

64-bits, 5V, 33MHz

64-bits, 5V, 33MHz

32-bits, 5V, 33MHz

32-bits, 5V, 33MHz

To remove and replace or install I/O cards, see the section titled “I/O Cards” on page 110.

NOTE	If you are installing an additional HP VISUALIZE-fxegraphics card, after you
	connect the monitor to the additional graphics card, you must change the
	graphics path for that monitor. To do this, see the section “Displaying and
	Setting the Monitor Type” on page 150.

Chapter 2 39