HP unix manual Fan Faults and Warnings, Fan Numbers and Corresponding Names

Troubleshooting

Fan Faults and Warnings

Fan Faults and Warnings

This section provides the fault (FLT) and warning (WRN) messages you will see in the LCD if there is a problem with a fan in the B2000 workstation.

A chassis code which indicates that a fan has failed (FLT D01n) or is running too slowly

(WRN D02n) within a B2000 workstation specifies the fan number, n. Table 3-1 lists the fan numbers and their names. To locate the correct fan, see Figure 3-5 on the next page.

Table 3-1. Fan Numbers and Corresponding Names

Fan Number (n)	Name of the Fan
2	I/O fan

4System fan

5Processor fan

Here is an example of a fault message for the system fan (4):

FLT D014 SYS BD fan 4: failure!

Here is an example of a warning message for the processor fan (5):

WRN D025 SYS BD fan 5: too slow!

48 Chapter 3