HP unix manual Tightening the Bracket Screws

Field Replaceable Units

FRU Removal and Replacement

10.Tighten the two CD drive bracket screws as shown in Figure 4-9.

Figure 4-9. Tightening the Bracket Screws

Bracket

Screw (hidden)

Bracket Screw

11.Rotate the workstation around until you see the open, left side of the workstation. Plug the audio, ATAPI, and power cables into their appropriate connectors on the rear of the CD drive, as shown in Figure 4-10. Note that the connectors are keyed for proper insertion, and that you should connect the audio cable first.

NOTE	The red striped side of the ATAPI cable should be positioned next to the
	power cable.

Figure 4-10. Plugging in the Audio, ATAPI, and Power Cables

Audio

Cable

Ferrite Bead

ATAPI Cable

Power Cable

94 Chapter 4