vi
Diamond Storage Array Installation and Operation Manual
Appendix C Product Safety

Safe handling of the Diamond Storage Array will help protect its components as well as the people

working with them.

The Diamond Storage Array is heavy (92 pounds for the f loor model, 86 pounds for the rack mount syste m). Two
people will be needed to move it safely.
Mechanical, shock and energy hazards are present through the system if one or more of the modules is removed.
There are no operator-serviceable components ins ide the unit except those indicated in
Hardware Ma intena nce
on
page 69 and
Hot Swap Operating Instructions on page 71
of this manual.
CAUTIONCAUTION
All modular components must be replaced by qualified personnel only.
This equipment must be connected to a protective earth ground in accordance with the instructions provided in
this guide. Improper grounding may result in an electrical shock.
When the power supply green LED is on, the power source is fully operationa l,
delivering power to the system. The only way to completely disconnect from the system
is to remove the AC power cord from the back of the unit from both power supply inputs.
The switch on the power supply is only a standby switch and does not disconnect the AC
from the system.
This unit is designed to only have inside communication lines connected to it (no lines
outside the building proper).
The Diamond Storage Array must be provided with adequate air flow. To reduce the risk of damage, the amb ient
temperature of the inlet air should not exceed 40
o
C.
Service personnel must follow proper grounding methods wh en working with or around the system because of
the Diamond Storage Array’s electrostatic sensitive components. Use a static wriststrap when handling any
components from the Diamond Storage Array.

Safety compliances

• UL 1950 3rd Edition
• CSA 22.2 No. 950-95
• LEDs and fibre GBIC are Class 1 Laser Rated

EMC specifications

• EN 55022: class A
• ENV 50204 RF Immunity 900 MHz Pulse
• EN 6100-4-8 Magnetic Immunity
• EN 61000-4-2: ESD
• EN 61000-4-3: Radiated Immunity
• EN 61000-4-4: EFT
• EN 61000-4-5: Surge
• EN 61000-4-6: Conducted Immunity
• EN 61000-4-11: Voltage Dips and Interruptions

Radio and television interference

WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Power Switch Positi ons
On Stand-by