Boot Console Handler
Booting the Workstation
Booting the Workstation
You usually start the system by turning it on and waiting for
For example, you may want to start the system from an operating system that is stored on a device that is different from the usual boot device. If the normal operating system kernel or the disk on which it resides becomes damaged or unusable, you may wish to boot from a different disk or perhaps another type of device, such as a CD drive.
Here are some possible booting scenarios you may encounter:
•If you know which device you want to boot from, and you know that it contains a bootable operating system, follow the directions in “Accessing the Boot Console Handler” earlier in this chapter, and then type the following at the prompt:
Main Menu: Enter command > boot device
where device is the hardware path to the device, specified in Mnemonic Style Notation. For example, if you wish to boot an operating system that is stored on a
Main Menu: Enter command > boot scsi.1.0
•If you do not know which device or the hardware path for the device you want to boot from, then type the following at the prompt and press Enter:
Main Menu: Enter command > search
A message similar to the following will be displayed:
Path Number | Device Path | Device Type |
P0 | IDE | TEAC |
P1 | SCSI.6.0 | SEAGATE ST39102LC |
At the prompt, you might type the following and press Enter:
Main Menu: Enter command > boot P1
Note that the operating system on the specified device (P1) is used to boot the system (also see the section “Searching for Bootable Media”).
144 | Chapter 6 |
