HP unix manual Try to find a single memory bank to use

Troubleshooting

Selftest Failures

Table 3-2. Chassis Codes for the B2000 Workstation

Ostat	Code	FRU	Message	Description
TST	7020	SYS BD	search for IMM	Try to find a single memory bank to use
				for the initial memory module.
TST	703s	DIMM	DIMM s IMM vrfy	DIMM s was the initial memory module
				last boot. Verify it still works.
FLT	704s	DIMM	DIMM s IMM fail	DIMM s failed the initial memory module
				test.
TST	705s	DIMM	DIMM s IMM test	Test DIMM in slot s as the initial memory
				module.
INI	706s	DIMM	DIMM s is IMM	DIMM s chosen as initial memory module.
INI	70F0	DIMM	DIMM scan done	Memory DIMM scan complete.
TST	7100	SYS BD	mem register tst	Start testing registers in memory
				controller.
WRN	7101	SYS BD	skip mem reg tst	Bypass the memory controller register
				test.
FLT	7102	SYS BD	mem addr reg tst	Firmware detected an error in the
				memory controller address registers.
FLT	7103	SYS BD	mem mbat reg tst	Firmware detected an error in the
				memory controller bank registers.
FLT	7104	SYS BD	mem reg tst fail	Firmware detected an error in the
				memory controller memory registers.
FLT	7105	SYS BD	mem err reg test	Firmware detected an error in the
				memory controller error registers.
FLT	7106	SYS BD	mem err clr fail	Firmware was unable to clear the error
				registers after testing.
INI	7200	DIMM	strt DIMM detect	Start the Serial Presence Detection (SPD)
				to search for memory DIMMs.
INI	7201	DIMM	DIMM detect x%	SPD is x% finished.
WRN	7202	SYS BD	skip DIMM detect	Bypass Serial Presence Detection.
FLT	7203	DIMM	unsupp DIMM type	SPD found an unsupported DIMM type.
FLT	7204	DIMM	SPD fatal error	SPD detected an unexpected, fatal error.
INI	7205	DIMM	add HP DIMM type	New HP manufactured DIMM type added
				to tables.
INI	7206	DIMM	non-HP DIMM type	New non-HP DIMM type added to tables
				(use at own risk).

62 Chapter 3