41

Restore from backup

You can restore backups previously created (as stated in the Create backup section) from hard drive, CD or DVD.

1Boot to Windows XP.

2Press <Alt> + <F10> to open the Acer eRecovery utility.

3Enter the password to proceed. The default password is six zeros.

4In the Acer eRecovery window, select Recovery actions and click Next.

5Select the desired restore action and follow the onscreen instructions to complete the restore process.

Note: The "Restore C:" item is enabled only if there is a user backup stored on the hard drive (D:\). Please refer to the Create backup section.

Create factory default image CD

When the System CD and Recovery CD are not available, you can create them by using this feature.

1Boot to Windows XP.

2Press <Alt> + <F10> to open the Acer eRecovery utility.

3Enter the password to proceed. The default password is six zeros.

4In the Acer eRecovery window, select Recovery settings and click Next.

5In the Recovery settings window, select Burn image to disk and click Next.

6In the Burn image to disk window, select 01. Factory default image and click Next.

7Follow the instructions on screen to complete the process.

Re-install bundled software without CD

Acer eRecovery stores pre-loaded software internally for easy driver and application re-installation.

1Boot to Windows XP.

2Press <Alt> + <F10> to open the Acer eRecovery utility.

3Enter the password to proceed. The default password is six zeros.

4In the Acer eRecovery window, select Recovery actions and click Next.

5In the Recovery settings window, select Reinstall applications/drivers and click Next.

English

Page 49
Image 49
Acer TravelMate 4400 manual Restore from backup, Create factory default image CD, Re-install bundled software without CD