To left wall of | Flat face | Antenna | |
oven cavity |
|
| motor shaft |
|
|
| To right wall |
|
|
| of oven cavity |
|
| Flat face | |
Antenna holder | Hole | Centre | |
| |||
Stirrer antenna
Stirrer antenna's big blade
Figure C-9. Derection of Antenna Motor Shaft and Stirrer Antenna Assembly
Antenna holder | Stirrer antenna |
|
Tab
Antenna motor shaft
Stirrer antenna assembly
Tab
Antenna motor shaft
Oven cavity bottom plate
Antenna holder
Stirrer antenna
Antenna | Tab |
motor shaft |
|
Oven cavity bottom plate 
Figure C-10. Stirrer Antenna Assembly Installation
INSTALLATION OF CERAMIC SHELF
1.Disconnect the power supply cord.
2.Open the door and block it open.
3.Make sure that the smooth surface of the ceramic shelf face up.
4.Make sure that the rubber packing without a fin of the ceramic shelf faces the front of the oven.
NOTE: The three (3) rubber packings with the fins and the one (1) rubber packing without a fin are attached to the four (4) edges of the ceramic shelf. The one (1) rubber packing without a fin is the front edge of the ceramic shelf.
5.Put the front edge of the ceramic shelf into the front edge of the oven cavity bottom plate.
6.Push down the rear edge of the ceramic shelf into the oven cavity bottom plate.
7.Now, the ceramic shelf is installed.
WARNING
Make sure that the rubber packing is not caught between the oven door and the oven cavity front plate, to avoid possible exposure to excessive microwave energy.
Oven Cavity
Rear Edge
Push
| Ceramic |
Front Edge | Shelf |
26
