Huawei HG523a manual FAQs, Restoring Default Settings

To log in to the Web-based configuration utility after you change the IP address successfully, you need to launch the Internet Explorer, and then enter the new IP address in the address bar. Ensure that the IP address of the computer is in the same network segment as that of the HG523a so that the computer can access the Web-based configuration utility.

5.5Restoring Default Settings

After you restore the default settings, your customized data is lost. Therefore, use this function with caution.

You can quickly restore the default settings of the HG523a by pressing the RESET button on the rear panel. To restore the default settings, press and hold the RESET button for over six seconds after the HG523a is powered on, and then release the button. In addition, you can restore the default settings of the HG523a through the Web-based configuration utility.

To restore the default settings through the Web-based configuration utility, do as follows:

Step 1 Log in to the Web-based configuration utility, and then choose Advanced > Maintenance > Device > Reset in the navigation tree to display the reboot page.

Step 2 Click Restore Default Settings.

After the preceding operations, the page jumps to the login page. You can log in to the Web-based configuration utility by entering the default user name and password that are admin.

6FAQs

How can I quickly restore the default settings of the terminal?

To restore the default settings, press and hold the RESET button on the rear panel for over six seconds after the HG523a is powered on, and then release the button.

What can I do if I cannot access the Internet through the terminal?

Step 1 Check whether the Power indicator on the terminal is solid on. If the Power indicator is off, perform further checks as follows:

1.Ensure that the terminal is turned on.

2.Ensure that electricity comes from the socket and that the power input from the socket meets the requirements described on the label of the

12