3.Select Enable check box for WAN connection.
4.Enter the VPI and VCI that are provided by the network operator in the VPI/VCI text boxes.
5.Select Internet from the Service list.
6.Select PPPoE option button for Connection type.
7.Select Enable check box for NAT.
8.Enter the user name and password that are provided by the network operator in the User name and Password text boxes, and keep the default settings of other parameters.
9.Click Submit to save the settings.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time when you power on your computer, you can surf the Internet without any configuration.
3.2Accessing the Network through the PPP
If you select this method for accessing the network, you need to install and configure the
Step 1 Set the working mode of the HG523a to Bridge.
For details, refer to the procedure for enabling the embedded
Step 2 Install and configure the PPP
The PPP
1.Choose Start > All Programs > Accessories > Communications > Network Connections.
2.Click Create a new connection in Network Tasks to display the New Connection Wizard window, and then click Next.
3.Select Connect to the Internet, and then click Next.
4.Select Set up my connection manually, and then click Next.
5.Select Connect using a broadband connection that requires a user name and password, and then click Next.
6.Enter the name (as desired) of the
7.Select Anyone's use or My use only, and then click Next.
6