English
Assigning Names to Preset Stations
You can assign a name of up to five characters to each preset station (from preset channel number 1 to 20). When a preset station is tuned in, its assigned name will appear on the display.
On the front panel only:
1.Tune in a preset station (preset channel number 1 to 20). See page 20 for details.
2. Press MEMORY (next to the TUNER button).
TUNER MEMORY
The preset channel number starts flashing.
CH–
Note:
If you press Control % / Þ while the preset channel number is flashing, you can change the
preset channel number.
100 1k 10k
3. Press Control # (or @) until the first character position starts flashing.
CH–
100 1k 10k
4. Press Control % / Þto select a character.
You can use the characters listed below.
CH–
100 1k 10k
TUNER MEMORY
Front panel
5. When a character you want appears, press Control #(or @).
The next (or previous) character position starts | CH– |
flashing.
100 1k 10k
6.Repeat steps 4 and 5 to enter up to five characters.
7.Press MEMORY (next to the TUNER button) again, while the last selected character is flashing, after you have assigned a name.
To erase the input characters
Insert blanks using the same procedure described above.
Available characters |
|
|
|
| |
Blank |
|
|
|
|
|
| A B C D E F G H I J K L M N O | ||||
P Q R S T | U V W X Y Z 0 1 2 3 4 | ||||
5 | 6 | 7 | 8 | 9 |
|
Page 21