JVC RX-630RBK manual Selecting the FM Reception Mode, Tuning in a preset station, Auto, Mono

CAUTION:

The preset channels may be erased in the following cases:

•When you press POWER to set it in the ÑOFF position.

•When you unplug the power cord.

•When a power failure occurs.

English

Tuning in a preset station

TUNER MEMORY

Front panel

1 2 3

4 5 6

7/P 8 9

On the front panel:

1.Press TUNER so that the Control %/ Þ/ @ / # buttons work for tuner settings. The lamp next to the button lights up.

2.Press Control % / Þuntil “–PRESET+” appears on the display.

3.Press Control @ / #to select a preset channel.

Each time you press the button, the preset channels changes.

•Pressing Control @ changes preset channels in decreasing order.

•Pressing Control #changes preset channels in increasing order.

From the remote control:

1.Press FM/AM.

Each time you press the button, the band alternates between FM and AM (MW/LW).

2.Press 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

Note:

When you use the 10 keys on the remote control, be sure that they are activated for tuner, not for the CD and others. (See page 36.)

+10 0 10

Remote Control

Selecting the FM Reception Mode

You can change the FM reception mode while listening an FM broadcast.

You can also store the FM reception mode for each preset station. (See page 19.)

On the front panel only:

1. Press TUNER so that the Control %/ Þ/ @ / # buttons work for tuner settings.

TUNER MEMORY

The lamp next to the button lights up.

2. Press Control % / Þuntil “FM MODE” appears on the display.

3.Press Control @ / #to select either “AUTO” or “MONO.”

•Normally select “AUTO.”

•When an FM stereo broadcast is hard to receive or noisy, select “MONO.”

AUTO:	When a program is broadcast in stereo, you will hear stereo sound; when in
	monaural, you will hear monaural sounds. This mode is also useful to suppress
	static noise between stations.
	The MUTE AUTO indicator lights up on the display.
MONO:	Reception will be improved although you will lose the stereo effect. In this
	mode, you will hear noise while tuning into the stations.
	The MUTE AUTO indicator goes off on the display.

Front panel

Page 20