JVC RX-630RBK manual English, FM/AM Alternates between FM and AM MW/LW

Using the Remote Control for Operating JVC Audio/Video Components

English

/I

SLEEP TV VCR AUDIO

	SEA MODE ONE TOUCH	CD-DISC
	OPERATION
1	2	3
4	5	6

7/P 8 9

+10 0 10

TV

CENTER REARCH VOLUME

SURROUND CONTROL

ON/OFF MODE DELAY

	VCR		TV
VIDEO		SOUND
FM/AM		CD
TAPE	TEST
E		PH	O
UT
M			NO
VOLUME
–	+
	PTY+
DISPLAY	PTY
MODE	PTY– SEARCH

RM-SR630RU

REMOTE CONTROL

You can operate JVC’s audio and video components with this receiver’s remote control.

To operate these components with the remote control, first select a source with the source selecting buttons on the remote control. Then, operate that source using the remote control.

Note:

If you choose a source on the front panel, the remote control will not operate that source. To operate a source with the remote control, the source must be selected using buttons on the remote control.

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC audio components through the COMPU LINK-3 (SYNCHRO) jacks (see page 35) in addition to the connections using cables with RCA pin plugs (see page 9).

•Aim the remote control directly at the remote sensor on the receiver.

After pressing FM/AM, you can perform the following operations:

FM/AM Alternates between FM and AM (MW/LW).

1 — 10, +10 Selects a preset channel number directly.

To select channel number 5, press 5. For channel number 15, press +10, then 5. For channel number 20, press +10, then 10.

After pressing CD, you can perform the following operations on a CD player:

3 Starts playing.

4Returns to the beginning of the current (or previous) track.

¢Skips to the beginning of the next track.

7	Stops playing.
8	Pauses. To release pause, press 3.
1 — 10, +10	Selects a track number directly.

To select track number 5, press 5. For track number 15, press +10, then 5. For track number 20, press +10, then 10.

After pressing CD-DISC, you can perform the following operations on a CD player-changer:

1 — 6, 7/P Select the number of a disc installed in a CD player-changer. Then continue to operate the CD player as described above.

After pressing TAPE, you can perform the following operations on a cassette deck:

3 Starts playback.

1Fast winds a tape from right to left.

ÁFast winds a tape from left to right.

7	Stops operation.
8	Pauses. To release pause, press 3.

Page 36