English
SURROUND
ADJUST
Front panel
ON/OFF
MODE
REAR
DELAY
Remote Control
3.Press SURROUND ADJUST so that the Control % / Þ/ @/ # buttons work for surround settings.
The lamp next to the button lights up.
4.Press Control %/ Þ until “– REAR +” appears on the display.
5.Press Control @/ # to adjust the rear speaker output level.
•Pressing Control @decreases the output level up to
•Pressing Control #increases the output level up to +10 dB.
6.Press Control % / Þ until
7.Press Control @/ # to adjust the delay time of the rear speaker output. Each time you press the button, the delay time changes as follows:
DELAY 1 DELAY 2
DELAY 4 DELAY 3
DELAY 1: | Select this when the distance from you to your rear speakers is greater than that to the front |
| speakers. |
|
|
DELAY 2: | Select this when the distance from you to your rear speakers is almost equal to that to the |
| front speakers. |
|
|
DELAY 3: | Select this when the distance from you to your rear speakers is a little less than that to the |
| front speakers. |
|
|
DELAY 4: | Select this when the distance from you to your rear speakers is much less than that to the |
| front speakers. |
|
|
To cancel the Hall surround, press Control %/ Þuntil “SURR OFF” appears in step 2. The HALL and SURROUND indicators go off.
From the remote control:
1.Press ON/OFF so that the SURROUND indicator lights up on the display.
The previous surround mode is recalled (at its previous settings) and is shown on the display. Each time you press the button, the surround mode turns on and off.
2.Press MODE repeatedly until “HALL” appears on the display.
Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):
PROLOGIC 3CHLOGIC HALL
SURR OFF
(Surround Off)
3.Press REAR +/– to adjust the rear speaker output level.
•Pressing REAR
•Pressing REAR + increases the output level up to +10 dB.
4.Press DELAY to adjust the delay time.
Each time you press the button, the delay time changes as follows:
DELAY 1 DELAY 2
DELAY 4 DELAY 3
To cancel the Hall Surround, press ON/OFF again so that the HALL and SURROUND indicators go off.
Selecting “SURR OFF” in step 2 above also cancels the Dolby Surround.
Page 29