JVC RX-630RBK manual Specifications, Amplifier, Video, English

English

Specifications

Amplifier

Output Power	At Stereo operation
	Front Channels	80 watts per channel. min. RMS, both channels driven into
		4 ohms at 1 kHz with no more than 0.9 % total harmonic
		distortion. (IEC268-3/DIN)
		70 watts per channel, min. RMS, both channels driven into
		8 ohms at 1 kHz with no more than 0.9 % total harmonic
		distortion. (IEC268-3/DIN)
		65 watts per channel, min. RMS, both channels driven into
		8 ohms, 40 Hz to 20 kHz with no more than 0.06 % total harmonic
		distortion.
	At Surround operation
	Front Channels	70 watts per channel, min. RMS, driven into 8 ohms at 1 kHz with
		no more than 0.7 % total harmonic distortion.
	Center channel	70 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more
		than 0.7 % total harmonic distortion.
	Rear channels	70 watts per channel, min. RMS, driven into 8 ohms at 1 kHz,
		with no more than 0.7 % total harmonic distortion.
Total Harmonic Distortion		0.06 %* at 65 watts output
(8 ohms, 1 kHz)		(* Measured by JVC Audio Analysis System)
Audio Input Sensitivity/	PHONO (MM)	2.5 mV/47 k ohms
Impedance (1 kHz)	CD, VCR, VIDEO, TV SOUND,	230 mV/47 k ohms
	TAPE
Audio Output Level	TAPE, VCR	230 mV
Signal-to-Noise Ratio	PHONO	70 dB/66 dB
(’66 IHF/DIN)	CD, VCR, VIDEO, TV SOUND,	87 dB/67 dB
	TAPE
Frequency Response (8 ohms)	PHONO	20 Hz to 20 kHz (±1 dB)
	CD, VCR, VIDEO, TV SOUND,	20 Hz to 20 kHz (±1 dB)
	TAPE
RIAA Phono Equalization		±0.5 dB (20 Hz to 20 kHz)
Loudness Control		+6 dB ±1 dB at 100 Hz
(Volume Control at –40 dB)		+4 dB ±1 dB at 10 kHz
S.E.A.	Center Frequencies	100 Hz, 1 kHz, 10 kHz
	Control Range	±10 dB ±2 dB

Video

Video Input Sensitivity/Impedance	VCR, VIDEO	1 Vp-p/75 ohms
Video Output Level	VCR, MONITOR OUT	1 Vp-p (at 1 Vp-p input)
Synchronization		Negative
Signal-to-Noise Ratio		45 dB

Page 39