Using Dolby Surround
English
SURROUND MODE
Front panel
ON/OFF
MODE
Remote Control
Once you have set the Dolby Surround adjustments, you can use the same adjustment every time you want to enjoy Dolby Surround.
The receiver memorizes two sets of Dolby Surround adjustment; one for Pro Logic and the other for 3ch Logic.
On the front panel:
1.Press SURROUND MODE so that the Control % / Þbuttons work for selecting the surround modes.
The lamp next to the button lights up.
2.Press Control %/ Þ until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.
The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up. Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):
PROLOGIC 
3CHLOGIC 
HALL 
SURR OFF 
(Surround Off)
3. Select and play a sound source which was processed with Dolby Surround and is labeled with mark.
To cancel the surround mode, press Control %/ Þuntil “SURR OFF” appears in step 2 above. The indicator of the selected mode and the SURROUND indicator go off.
From the remote control:
1.Press ON/OFF so that the SURROUND indicator lights up on the display.
The previous surround mode is recalled (at its previous settings) and is shown on the display. Each time you press the button, the surround mode turns on and off.
2.Press MODE until the surround mode you want appears on the display.
Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):
PROLOGIC 
3CHLOGIC 
HALL
SURR OFF 
(Surround Off)
3. Select and play a sound source which was processed with Dolby Surround and is labeled with mark.
To cancel the surround mode, press ON/OFF again so that the indicator of the selected mode and the SURROUND indicator go off.
Selecting “SURR OFF” in step 2 above also cancels the Dolby Surround.
Page 34
