JVC RX-630RBK manual Switching to a Broadcast Program of Your Choice Temporarily, Case

English

Switching to a Broadcast Program of Your Choice Temporarily

Another convenient RDS service is called “EON (Enhanced Other Network).”

This allows the receiver to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or

INFO) from a different station except in the following cases:

•When you are listening to a non-RDS stations (all AM (MW/LW) and some FM stations).

•When the last received FM station is a non-RDS station.

EON	On the front panel only:
	1. Press EON so that the last selected program type appears on the display.

The receiver enters EON standby mode.

2. Press TA/NEWS/INFO until the program type you want appears on the display.

TA/NEWS/INFO

Each time you press the button, the display changes to show the following.

TA NEWS/INFO TA/INFO TA/NEWS

		NEWS	INFO			TA/NEWS/INFO
	TA:	Traffic Announcement in your area.
	NEWS:	News.
	INFO:	Programs on medical service, weather forecast, etc.
CASE 1	If there is no station broadcasting the program			CASE 2	If there is a station broadcasting the program you have
	you have selected				selected
	The receiver continues playing the current source.				The receiver stops playing the current source, and tunes in
Ô					the program. The indicator of received PTY code starts
					flashing.
	When a station starts broadcasting the program				Ô
	you have selected, the receiver automatically
	switches to the station. The indicator of received				When the program is over, the receiver goes back to the
	PTY code starts flashing.				previously selected source, but still remains in EON
Ô					standby mode.

When the program is over, the receiver goes back to the previously selected source, but still remains in EON standby mode.

EON

To stop listening to the program selected by EON:

Press EON so that the program type (TA/NEWS/INFO) goes off from the display. The receiver enters EON off mode and goes back to the previously selected source.

Each time you press EON, the EON mode alternates between standby mode and off mode.

Front panel

Notes:

•In EON standby mode, if you change the source to AM (MW/LW) or if you carry out synchronized recording (see page 35), EON standby mode is canceled temporarily. The receiver goes back to EON standby mode again when you have finished that operation.

•While listening to a program tuned in by the EON function, you can only use STANDBY/ON , EON,

and DISPLAY MODE on the front panel or AUDIO and DISPLAY MODE on the remote control.

•When the receiver is turned off (into standby mode), the EON function is also turned off.

CAUTION:

When the source alternates intermittently between the station tuned in by the EON function and the currently selected source, press EON to cancel the EON function. This is not a malfunction of the receiver.

Page 25