Alto-Shaam 4.10ESiVH i n s t a l l a t i o n, ventless hood model, top exhaust vent, Filter track

Models: 4.10esi 4.10ESiVH

1 28
Download 28 pages 36.07 Kb
Page 20
Image 20
top exhaust vent

i n s t a l l a t i o n

ventless hood model

top exhaust vent

Filter track

Filter switch

1

2

1 Charcoal Filter: The charcoal filter should be inspected for contaminant's on a regular basis. Replacement must be made at a minimum of three month intervals — more often if heavy contaminant's are visible or if the filter no longer controls odors.

To remove the charcoal filter, pull and slide out. When replacing the filter, ensure that the filter clip is in place at rear of the filter. Make certain the air flow arrow(s) point toward the hood fan (back of unit), and that the filter is replaced using the filter track in the metal back plate provided with the hood.

FI-24114

2 Grease Filter: Cleaning frequency should be based on oven usage with a maximum of two weeks between cleaning if the oven is used for non-grease laden products or steam applications only. Grease laden products require cleaning frequency of at least once a week.

Remove the grease filter by pulling it straight out of the housing. Place the filter in the dishwasher or wash separately by placing in hot, soapy water until all grease and particles have been removed. Rinse thoroughly. Allow the filter to air dry before reinstalling.

To replace the grease filter, the metal handles on the filter casing should be facing toward the front of the unit.

FI-24113

CT Express INSTALLATION MANUAL • 18..

Page 20
Image 20
Alto-Shaam 4.10ESiVH, 4.10esi i n s t a l l a t i o n, ventless hood model, top exhaust vent, Filter track, Filter switch