i n s t a l l a t i o n

electrical connection

danger

ENSURE POWER SOURCE

MATCHES VOLTAGE IDENTIFIED

ON APPLIANCE RATING TAG.

danger

APPLIANCES WITH NO CORD

PROVIDED BY FACTORY MUST

BE EQUIPPED WITH A CORD OF

SUFFICIENT LENGTH TO PERMIT

THE APPLIANCE TO BE MOVED

FOR CLEANING.

ELECTRICAL CONNECTIONS MUST

BE MADE BY A QUALIFIED SERVICE

TECHNICIAN IN ACCORDANCE WITH

APPLICABLE ELECTRICAL CODES.

hard wired models:

hard wired models must be equipped with a country certified external allpole disconnection switch with sufficient contact separation.

if a power cord is used for the connection of the product an oil resistant cord like h05rn or h07rn or equivalent must be used.

danger

To avoid electrical shock, this appliance MUST be adequately grounded in accordance with local electrical codes or, in the absence of local codes, with the current edition of the National Electrical Code ANSI/ NFPA No. 70. In Canada, all electrical connections are to be made in accordance with CSA C22.1, Canadian Electrical Code Part 1 or local codes.

danger

IMPROPER INSTALLATION,

ALTERATION, ADJUSTMENT, SERVICE, OR MAINTENANCE COULD RESULT IN SEVERE INJURY, DEATH, OR CAUSE PROPERTY DAMAGE.

READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.

1.An electrical wiring diagram is located behind the control panel on the left side of the oven. 3 Phase units must be branch circuit protected with proper ampacities, in accordance with the wiring diagram. A dedicated 30 Amp breaker is required.

2.Wire size for the main incoming power to the unit must match the minimum size listed in the specifications. For supply connections, locate the wire size posted on the label located on the electrical control box cover, behind the service panel.

3.When connecting to a Delta-B (wild leg) on a

3-phase system, the wild leg must be connected to line 3. Install wiring with a strain relief.

4.Before operating the oven, check all cable connections in the electrical connection area for tightness since connections can loosen during transport.

NOTE: After both water and electrical connections have been completed, operate the oven

in any cooking mode for a period of 15 minutes and recheck the main power connections at the terminal block to make certain they remain tight.

380-415V:

For CE approved units: To prevent an electrical shock hazard between the appliance and other appliances or metal parts in close vicinity, an equalization-bonding stud is provided. an equalization bonding lead must be connected to this stud and the other appliances / metal parts to provide sufficient protection against potential difference. The terminal is marked

with the following symbol.

CT Express INSTALLATION MANUAL • 10.

Page 12
Image 12
Alto-Shaam 4.10ESiVH, 4.10esi manual Electrical connection, Hard wired models

4.10esi, 4.10ESiVH specifications

The Alto-Shaam CombiOven series, including models 4.10ESiVH, 4.10ESi, and 4.10CCi, is a revolutionary line of cooking equipment designed to enhance versatility and efficiency in commercial kitchens. These combi ovens are engineered for advanced cooking techniques, combining steam and convection heat, allowing chefs to achieve precise cooking results while conserving energy and promoting food quality.

One of the main features of the Alto-Shaam CombiOven is its FlexiRack system, which optimizes space and provides flexibility. This system allows for the seamless configuration of cooking trays, making it easy to adjust cooking capacity based on specific needs. The ovens also come with removable, dishwasher-safe racks that simplify cleaning and maintenance, further enhancing operational efficiency.

The 4.10ESiVH model features Alto-Shaam's exclusive Halo Heat technology, which creates a gentle, even heat distribution throughout the cooking chamber. This technology not only enhances cooking performance but also preserves food moisture and texture, resulting in superior finished dishes. Additionally, the models are equipped with a state-of-the-art touchscreen interface that streamlines the cooking process. Customized cooking programs can be set, and real-time monitoring ensures consistent results across different culinary applications.

Another notable characteristic of the Alto-Shaam CombiOven series is its energy-efficient design. These ovens consume less energy compared to traditional cooking methods, aligning with sustainability goals in modern kitchens. The built-in water filtration system ensures the steam produced is of high quality, reducing scale buildup and extending the lifespan of the equipment.

Furthermore, the 4.10CCi model includes advanced features such as a core temperature probe and multiple cooking modes, including steam, convection, and combination cooking. This level of versatility allows chefs to prepare diverse dishes, from moist baked goods to perfectly roasted meats. The compact design of the ovens also makes them suitable for operations with limited space, without compromising on performance or capacity.

In summary, the Alto-Shaam CombiOven series, particularly the 4.10ESiVH, 4.10ESi, and 4.10CCi models, stand out in the market for their innovative technology, user-friendly functionality, and energy-efficient performance. These ovens empower chefs to create restaurant-quality meals with ease, making them an invaluable asset for any professional kitchen.