2. How to use
Cleaner description
|
| ||
1 |
|
| |
2 |
| 12 | |
|
| ||
|
| 18 | |
3 |
| 19 | |
|
| ||
|
| 17 | |
4 |
| 16 | |
5 |
|
| |
11 |
| 12 | |
6 | |||
| |||
7 |
| 15 | |
8 |
| 13 | |
|
| ||
|
| 14 | |
10 | 9 |
| |
1.Handle
2.Hose
3.ON/OFF switch: located on left rear corner of cleaner body
4.Carrying handle
5.Bag door
6.Check bag indicator
7.Stair cleaning handle: located on lower edge of dirt cup.
8.Headlight
9.Furniture guard: helps prevent cleaner from marking furniture.
10.Nozzle control knob: slide knob to correct set- ting for height of carpet being cleaned.
11.Wands
12.Cord hooks: wrap cord around hooks for storage. The top hook rotates right or left for easy cord release.
13.Crevice tool
14.Handle release lever: step on lever to lower handle to operating or low positions.
15.Dusting brush
16.Final filter exhaust
17.Furniture nozzle
18.Hose hook
19.Crevice wand*: stores inside of extension wand
*Available on some models
Operate cleaner only at voltage specified on data plate on bottom of cleaner.
This cleaner is intended for household use.
Polarized plug
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
A |
B
ON-OFF switch
Plug cord into electrical outlet.
To turn cleaner ON, push switch (A) toward front of cleaner.
To turn cleaner OFF, push toward back of cleaner.
Cord clip
To help keep the cord out of the way while vacuuming, position cord down into cord clip (B) located between top cord hook and handle.
Continued ➜ | 5 |
