Dell 2950 E2111 SBE Log Disable, Crd # Dimm ##, E2112 Mem Spare Crd #, E2113 Mem Mirror Crd #

Table 1-6. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E2111	SBE Log Disable	The system BIOS has disabled	See "Troubleshooting System
	Crd # DIMM ##	memory single-bit error (SBE)	Memory" on page 120.
		logging, and will not resume
		logging further SBEs until the
		system is rebooted. "##"
		represents the DIMM implicated
		by the BIOS. If no memory riser
		card is present, the "Crd #" string
		is left out of the message.
E2112	Mem Spare Crd #	The system BIOS has spared the	See "Troubleshooting System
	DIMM ##	memory because it has	Memory" on page 120.
		determined that the memory had
		too many errors. "## & ##"
		represents the DIMM pair
		implicated by the BIOS. If no
		memory card is present, the "Crd
		#" string is left out of the
		message.
E2113	Mem Mirror Crd #	The system BIOS has disabled	See "Troubleshooting System
	DIMM ## & ##	memory mirroring because it has	Memory" on page 120.
		determined that one half of the
		mirror has had too many errors.
		"## & ##" represents the
		DIMM pair implicated by the
		BIOS. If no memory card is
		present, the "Crd #" string is left
		out of the message.
E2118	Fatal NB Mem CRC	One of the connections in the	See "Troubleshooting System
		Fully Buffered DIMM (FBD)	Memory" on page 120.
		memory subsystem link on the
		Northbound side has failed.
E2119	Fatal SB Mem CRC	One of the connections in the	See "Troubleshooting System
		FBD memory subsystem link on	Memory" on page 120.
		the Southbound side has failed.
I1910	Intrusion	System cover has been removed.	Information only.
I1911	>3 ERRs Chk Log	LCD overflow message.	Check the SEL for details on the
		A maximum of three error	events.

messages can display sequentially on the LCD. The fourth message displays as the standard overflow message.

26

About Your System