7Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. If the problem persists, go to the next step.

8Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

9Open the system. See "Opening and Closing the System" on page 54.

10Remove all expansion cards installed in the system. See "Removing an Expansion Card" on page 78.

11Close the system. See "Opening and Closing the System" on page 54.

12Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.

13Run the appropriate online diagnostic test.

If the tests fail, see "Getting Help" on page 147.

14For each expansion card you removed in step 10, perform the following steps:

a Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. b Open the system. See "Opening and Closing the System" on page 54.

c Reinstall one of the expansion cards.

d Close the system. See "Opening and Closing the System" on page 54. e Run the appropriate diagnostic test.

If the tests fail, see "Getting Help" on page 147.

Troubleshooting the Microprocessors

Problem

Error message indicates a processor problem.

Front-panel status LCD indicates a problem with the processors or system board.

A heat sink is not installed for each processor.

Action

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.

1Run the appropriate online diagnostics test. See "Using Server Administrator Diagnostics" on page 131.

2Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

3Open the system. See "Opening and Closing the System" on page 54.

4Ensure that each processor and heat sink are properly installed. See "Processors" on page 93.

5Close the system. See "Opening and Closing the System" on page 54.

128

Troubleshooting Your System

Page 128
Image 128
Dell 2950 owner manual Troubleshooting the Microprocessors