Dell 2950 Opening and Closing the System, Replacing the Front Bezel, Opening the System

Figure 3-2. Removing the Front Bezel

2

1

1 bezel lock 2 control panel LCD

Replacing the Front Bezel

To replace the front bezel, perform the above steps in reverse.

Opening and Closing the System

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

Opening the System

To upgrade or troubleshoot the system, remove the system cover to gain access to internal components.

1Unless you are installing a hot-plug component such as a cooling fan or power supply, turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2To remove the system cover, turn the latch release lock counter-clockwise to the unlocked position. See Figure 3-3.

3Lift up on the latch on top of the system. See Figure 3-3.

4Grasp the cover on both sides and carefully lift the cover away from the system.

54

Installing System Components