Jumpers and Connectors 135
Jumpers and ConnectorsThis section provides specific information about the system jumpers and describes the connectors on
the various boards in the system.
System Board Jumpers
Figure6-1 shows the location of the configuration jumpers on the system board. Table 6-1 lists the
jumper settings.
NOTE: To access the jumpers, remove the cooling shroud by lifting the release latch and sliding the shroud
towards the front of the system. See Figure3-10.
NOTE: Lift up the memory module airflow shroud for easy access to the jumpers.
Book.book Page 135 Friday, February 3, 2006 11:09 AM