Sharp LC-22LE510E LCD TV and Operating Buttons, Viewing the Connections Back Connectors

Models: LC-22LE510E

1 42
Download 42 pages 41.4 Kb
Page 10
Image 10

LCD TV and Operating Buttons

FRONT and REAR VIEW

Control buttons VIEW

Control Buttons

 

 

1. Standby Off/On button

 

 

2. TV/AV button

 

 

3. Programme Up/Down buttons-

 

 

Volume Up/Down buttons

 

 

Note:You can use +/- buttons

 

 

to change volume. If you want

 

P\V-AV

to change channels, press P/V/

 

AV button once and then use

 

 

 

 

+/- buttons. If you hold the P/V/

 

 

AV button about a few seconds,

 

 

source OSD will be displayed.

 

 

Main menu OSD cannot be

 

 

displayed via control buttons.

Viewing the Connections - Back Connectors

1

VGA

SPDIF

Coax.OUT

SCART

1.HDMI 1: HDMI Input

HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI connection.

2.RF Input connects to an aerial antenna system or a cable.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

3.SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.

Note: S-VHS signal is supported via the scart socket.

Note: When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket.

4.PC Input is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

5.SPDIF Coaxial Out outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input

English - 9 -

A01_MB60_[GB]_1910UK_IDTV_TC_PVR_BRONZE17_22942LED_YPBPR

_ROCKER_10073165_50192621.indd 9

18.07.2011 14:29:15

 

 

 

Page 10
Image 10
Sharp LC-22LE510E operation manual LCD TV and Operating Buttons, Viewing the Connections Back Connectors, Hdmi 1 Hdmi Input