Sharp LC-22LE510E Viewing the Connections Side Connectors, Power Connection, Aerial Connection

Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that
	you subscribe to. For more information, see “Conditional Access” section.
2.	USB Inputs.
	Note that programme recording feature is available via these USB inputs. You can
	connect external hard disk drives to this input.
3.	TV control buttons.
4. Component Video Input (YPbPr) is used for connecting component video.		USB
	You can connect the component video and audio sockets with a device that has	5Vdc
	component output. To do this, you must use the supplied component video connection	Max:500mA
	cable for enabling connection. First, plug single jack of the cable to the TV’s YPbPr socket
	(side). Afterwards, insert your component cable’s (not supplied) connectors into the plural
	part of the Component video connection cable. Colours of the connected jacks should
	match.	P\V-AV
5. Side audio-video connection input is used for connecting video and audio signals of		AV YPbPr
	external devices. To make a video connection, you must use the supplied AV connection
	cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV	SIDE
	socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW
	input (located on the plural side) of the supplied AV connection cable. Colours of the
	connected jacks should match.
	To enable audio connection, you must use RED and WHITE inputs of the side AV connection cable.
	Afterwards, insert your device’s audio cable’s connectors into the RED and WHITE jack of the
	supplied side AV connection cable. Colours of the connected jacks should
	match.
	Note: You should use audio inputs of side AV connection cable (RED &
	WHITE) to enable sound connection when connecting a device to your TV
	by using PC or COMPONENT VIDEO input.

6.Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones (optional).

7., switch is used for turning the TV on or off.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50Hz.

•After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet.

Aerial Connection

•Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

Aerial or Cable

1

VGA

SPDIF

Coax.OUT

SCART

English - 10 -

A01_MB60_[GB]_1910UK_IDTV_TC_PVR_BRONZE17_22942LED_YPBPR _ROCKER_10073165_50192621.indd 10 18.07.2011 14:29:20