EverFocus EQ350 Lens Mount, Locking Screw, DC Lens Connector 4 pin socket, IRIS Level Control

1. C/CS mount Focus Switch Ring

Use this ring to adjust the appropriate focal length according to the type of lens. Rotate the ring clockwise for the CS-mount lens, rotate it counterclockwise for the C-mount lens. The factory setting is CS-mount.

2. Lens Mount

To mount an appropriate C-mount or CS-mount lens.

3. Locking Screw

Use the locking screw to fix the focal length for preventing losing focus.

4. DC Lens Connector (4 pin socket)

To connect to the lens plug of the auto iris lens.

5. Camera Setting DIP Switches

There are 6 DIP switches located on the sideboard, which are for camera setting. The switches in order from top is Flickerless, Back Light Compensation, Electronic Shutter, Automatic Gain Control, Line-Lock and Auto Iris Lens type. Please see camera DIP switch setting section.

6. IRIS Level Control

Brightness Level can be adjusted from the IRIS level VR while using the direct drive lens.

Turn counterclockwise to L to get darker picture.

Turn clockwise to H to get brighter picture.

7. V-Phase Adjustment Screw

The vertical phase may require adjustment to synchronize the vertical phase of the camera with other camera in the system when it is being used in the line-lock sync mode. Make the adjustment when the vertical phase of the camera does not match with other cameras.

5