Star Micronics XB24-250 II user manual Adjusting for paper thickness

Adjusting for paper thickness 39

Original + 3 to 4 (Multi-Part Mode)

Multi-part Mode and an optional pull tractor are recommended when printing on 4 or 5-ply paper.

Adjusting for paper thickness

Paper comes in different weights, normally expressed as gsm (grams per square meter) or lbs (pounds). Some form paper also has multiple pages that make them quite thick. Use the following procedure to change the gap between the print head and the platen and adjust for paper thickness.

❏Move the adjustment lever to one of its settings. Position 2 or 3 is most suitable for single-sheet paper.