Star Micronics XB24-250 II user manual Printer Setup

6Printer Setup

make sure that the side tabs fit into the grooves on the sides of the cartridge holder.

❏While guiding the ribbon between the print head and print head shield, press down gently on the cartridge until the side tabs snap securely into place.

❏Rotate the knob on the cartridge again to take up any slack.

❏Close the front cover of the printer.

Important!

Printing that is poor quality or too light is almost always due to a ribbon that is simply worn out or “used up.” If you experience problems with print quality, check the conditio of the ribbon. If the black part looks gray and well-worn, replace the ribbon with a new one.