6C O N N E C T I O N S
1) Connect the cable wireout from
the wall in to the cable box RF
input.
2) Connect an RF cable out from
the cable box, in to VCR RF
input.
3) Connect an RF cable o u t f ro m
V C RRF output, i n to TV VHF/UHF
i n p u t .
❒Refer to the VCR and/or cable
box instructions.
1) Connect the cable or antenna
wire out from the wall, in to the
VCR RF input.
2) Connect an RF cable o u tf rom the
V C Routput, i n to the TV’s RF input.
❒Refer to the VCR’s instructions.
❒If you want to use the VCR as a
separate tuner, (in other words
not be required to have the VCR
on Channel 3 or 4 when the
power is on) you can connect a
two-way splitter in between the
cable and the VCR connections.

#1

#2

CABLE CONNECTIONS
Illustration of C-20910
Illustration of C-20910

AV-27920AV-20920 • AV-20921

REA R PAN EL DIAG RAM S

C-13910 • C-13911

C-20910

T h e re are two basic types of antenna/cable hookups, but they are easy to distinguish.
# 1 If you have an a n t e n n a ,or have a cable TV system that does not re q u i r e you to use a cable box to tune
channels, use diagram #1. (No cable box, Diagram #1.)
# 2 If you use a cable box to access any or all channels,use diagram #2. (Cable box, Diagram #2.)