Konica Minolta 752 operation manual Troubleshooting, Error Display and Remedy, page

5. Troubleshooting

5-1. Error Display and Remedy

When an error occurs in the device, the error code and the description are displayed on the message column on the control panel.

The following shows the errors and the remedies displayed in this device.

Error Code	Description	Remedy
E4A20	The front cover is open.	Close the front cover.
E4A21
E4110	The film cannot be sent from the upper	• Pull out the upper tray, and remove jammed film. (Refer to
E4112	tray.	page 53.)
		• When a film jam occurs when loading the film, load the
		film again. (Refer to page 61.)
E4126	The upper tray is open.	Close the upper tray.
E4210	The film cannot be sent from the lower	• Pull out the lower tray, and remove film jam. (Refer to page
E4212	tray.	53.)
		• When a film jam occurs when loading the film, load the
		film again. (Refer to page 61.)
E4226	The lower tray is open.	Close the lower tray.
E4111	The film cannot be sent from the descent	Open the front cover, and remove a jammed film. (Refer to
E4113	transport section.	page 54.)
E4211	Film jams occur between the descent
E4213	transport section and the exposure sec-
E4310	tion.
E4311
E4312
E4410
E4411
E4510	The film cannot be sent from the elevator	Open the front cover, and remove a jammed film. (Refer to
	transport section.	page 55.)
	Film jams occur between the exposure
	section and the elevator transport section.
E4511	Film remains in the HPRO (heat process-	Open the front cover, and remove jammed film. (Refer to
E4610	ing) section.	page 56.)
E4611	Film jams occur in the HPRO (heat pro-
E4710	cessing) section.
E4120	No FILTER exists.	Place FILTER.
E4220	FILTER cannot be detected.	Place FILTER in the specified place correctly. (Refer to page
E4A22		66.)
E4810	Film remains in the sorter basket.	Remove the film from the inlet of the sorter. (Refer to page
E4811		58.)
E4812	The sorter cover is open.	Close the sorter cover.
E4820

DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 47