Konica Minolta 752 operation manual How To Operate Maintenance Mode, Setting START TIMER Function

4-3.How To Operate Maintenance Mode

4-3. How To Operate Maintenance Mode

"Setting START TIMER Function

Setting the START TIMER function will start up the device from the Standby status automatically, and make it into READY on the specified time. Setting the START TIMER function to ON/OFF, and the start-up time can be made for each day.

Follow the procedure below to set the START TIMER.

(1)Touch [START TIMER] on the maintenance menu screen.

The START TIMER screen will appear.

The key on the right of each day shows the ON/OFF of the

START TIMER.

"H" and "M" on the right of those keys show the hour and minute for start time.

(2)Touch [ON] on the right of [START TIMER] to acti- vate the START TIMER function.

Touching [OFF] clears the START TIMER function. The selected key will be highlighted.

The key on the right of each day shows the ON/OFF of the

START TIMER.

(3)Touch the key on the right of each day on which you wish to start the device automatically to display ON.

Touching the key again displays [OFF].

(4)When setting the time, touch H (hour) or M (minute) on the right of each day, then touch [$] / [%].

(5)After the settings are complete, touch [OK].

The setting becomes valid, and the maintenance menu screen re-appears.

When you touch [CANCEL], the maintenance menu screen re- appears without registering the settings.

IMPORTANT

When you set the START TIMER function to ON, leave the breaker of the device ON.

18 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6