Shut-down Operation | Konica Minolta 752 manual

3-3.Shut-down Operation

3-3. Shut-down Operation

Following the procedure below to shut down the device.

(1) Touch [OPERATION OFF] on the control panel.

CAUTION

Be sure to check that PRINT QUEUE shows "000" before performing the shut-down operation. If you shut down the device when PRINT QUEUE shows any number other than "000", the remain- ing data that has not printed yet will be printed out next time the device starts up.

(2)The conﬁrm screen of OPERATION OFF appears.

Different conﬁrm screens appear when the START TIMER is set to ON and when not set.

•When START TIMER is not set to ON;

If START TIMER is not set to ON, when you touch [OPERA- TION OFF] on the normal screen, the conﬁrm screen on the right appears.

(1)Touch [OK] to perform OPERATION OFF, then the message shown on the lower-right appears.

Touching [CANCEL] will go back to the normal screen.

(2)The device will be shut down in approx. 2 hours, and the display on the control panel will go off.

The FILTER fan functions for approx. 2 hours until the HPRO (heat processing) section is cooled down. During that time, the backlight of the control panel fades out.

IMPORTANT

When you need to print out some data during shut-down operation, touch [CANCEL] to go back to the normal screen.

8 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6

Image 20

Konica Minolta 752 operation manual Shut-down Operation, When Start Timer is not set to on

Contents

Drypro model Blank DRY Laser Imager Drypro Model Introduction Operation environmentImaging environment Sorter LiS-752 is optional device Descriptions of Symbol Mark Symbol mark Descriptions of symbol mark Descriptions on Warning Label Descriptions on warning caution labelPage Front Rear Safety Caution Be sure to ground the device well Do not operate the switches with wet hands Plug the power cable completelyBe careful not to trip over the power cable to damage it When unplugging the power cable, do not pull it Precaution on Installation Location PrecautionDisposal Precaution Front View Name of Each ComponentMain Body Rear View Sorter LiS-752 option Structure Description on screen How To OperateControl Panel Start-up Operation Power saving mode When Start Timer is not set to on Shut-down Operation When Start Timer is set to on Touch OK to perform Operation OFF proce- dure Shut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Maintenance Mode Function of Maintenance Mode Switching Maintenance Mode Start-up maintenance modeShut-down maintenance mode Touch Maintenance How To Operate Maintenance Mode Setting Start Timer Function Setting Date/Time Time SET Touch on the upper part of the screen Touch Previous Print on the maintenance menu screenRe-printing Printed Page Previous Print Touch the box on the right of Copy and input the print count Touch a LUT name you wish to apply for printing Density Touch Store MIN Density Calibration Touch Calibration on the maintenance menu screen Calibrating Density Calibration Automatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Touch Cover Open on the maintenance menu screen Opening/closing front cover Cover Open Adjusting control panel Panel Adjust Touch Exit How To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Conﬁrming and setting ﬁlm count data Touch Film Data on the maintenance menu screenConﬁrming ﬁlm count data Weekly ﬁlm count Monthly ﬁlm count Setting ﬁlm count preference Touch Film Data Setup on the ﬁlm count data screen Setting print preference Touch Print Condition on the maintenance menu screen Print preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select After the settings are complete, touch Exit Sets the format of date to be printed on the ﬁlm Setting user LUT Touch the user LUT name to be set on the LUT select screenTouch LUT Library Touch the name of the LUT to be applied Touch Data on the lower part of the screen Touch User LUT on the maintenance menu screenCreating user LUT Touch Edit on the LUT data screen Conﬁrming the LUT curve Setting power saving mode Touch Power Save on the Maintenance Menu screen How To Operate Maintenance Mode Error Code Description Remedy TroubleshootingError Display and Remedy Error Display and Remedy Resetting Errors When an error cannot be reset Touch Error Queue Re-starting Removing Jam When Cover Open is displayedWhen Sorter Cover is displayed Jam in tray Press in the tray until it locks Film outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Service and Maintenance Periodical Maintenance and InspectionOuter cover of the main unit Inside of main unit Replacing Filter Before replacing the FILTER, be sure to touch FIL Servicing by a user Service and Maintenance ScheduleOther service and maintenance Conﬁrming maintenance and maintenance display Speciﬁcations Drypro Model Sorter Option Speciﬁcations Appendix Time zone and code No. table Handling and Storage of Unexposed Film Handling and Storage of Developed Film Blank Blank