Precaution
"Disposal Precaution
When disposing the following used parts, accept the regulations of each local government.
1)The DRYPRO 752 itself.
2)The packaging materials for DRYPRO 752.
3)The photosensitive materials used on the DRYPRO 752.
4)The lead and lithium batteries inside the DRYPRO 752, which can be hazardous and must be disposed properly.
"Precaution on Installation Location
Be sure to observe the following conditions for the installation location of this device.
By installing this device in the Radiology Department, you could make the work flow smooth.
1)Install the device in a location where it is not exposed to water.
2)Install the device in a location where it is not exceed the temperatures or atmospheric pressure described in the specifications.
3)Install the device in a location where it is not exposed to direct sunlight.
4)Install the device in a flat place.
5)Install the device where there is no likelihood of being given by vibration or impact.
6)Install the device in a location where there is no likelihood of being adversely affected by chemical agents, or air containing gas, dust, salt or sulfur, etc.
[NOTE] : If the contents of this page are not legible, order a new manual.
x DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
