25
Installation
This chapter contains installation instructions for the Nortel Secure Network Access Switch (NSNA).
Navigation
•"Unpacking the device" (page 25)
•"Installing an NSNA device into a rack" (page 26)
•"Cabling the device" (page 30)
Unpacking the device
Unpack the shipping container to ensure the device and all accessories are included and undamaged.
Procedure steps
Step Action
1Remove the equipment from the shipping container and place the device on antistatic material.
2Check all items for damage.
ATTENTION
If the equipment is damaged, contact your Nortel sales representative.
3Use the following device shipping accessories checklist to verify that in the shipping container includes all contents.
Check |
| Accessory | Use to |
|
|
|
|
|
| Switch | Install in a 4 post server rack. |
|
|
|
|
|
| Power units | Connect the units to an |
|
|
| appropriate and properly |
|
|
| grounded power source. |
|
|
|
|
|
| Network cables | Connect the device. |
|
|
| |
Nortel Secure Network Access |
| ||
Installation — Quick Start Switch 4070 |
| ||
| |||
2.0 | 28 July 2008 |
| |
Copyright © 2008, Nortel Networks
