Nortel Networks 4070 quick start Installation checklist, Procedure steps

Installation checklist 23

Installation checklist

This checklist represents the high-level tasks that must be performed to successfully install the Nortel Secure Network Access Switch. Device installation involves the following steps:

Procedure steps

Step Action

1Choose a suitable location to install the device.

Use the information contained in the following sections to determine where the device should be installed:

•Safety and installation precautions

•Hardware specifications

2Unpack the device from the shipping container.

Unpack all items from the original packaging and determine if all items have been shipped. All items listed in Package contents should be present. If items are missing, contact the party from whom the Nortel Secure Network Access Switch was purchased.

3Mount the switch.

To rack mount the Nortel Secure Network Access Switch, see the Installing the Nortel SNAS 4070 in Nortel Secure Network Access Installation — Switch, NN47230-302.

The Nortel Secure Network Access Switch is intended to be installed in a 4 post server rack. The device cannot be installed in a 2 post equipment rack. It needs to be installed in a server rack, which is a 4 post rack.

4Connect the device power units to an appropriate, properly grounded power source.

5Connect network cables to the device.

6Power on the switch by depressing the power button on the front of the unit.

—End—

Nortel Secure Network Access

Installation — Quick Start Switch 4070

NN47230-303 01.01 Standard

2.0 28 July 2008

Copyright © 2008, Nortel Networks